Meler Micron PUR LC, Instruction Manual

Page: 6 / 106

MELER GLUING SOLUTIONS TABLE OF CONTENTS
Modes of operation 4-16
Operating mode with internal pumping control and internal speed control 4-16
Operating mode with internal pumping control and external speed control 4-17
Operating mode with external pumping control and internal speed control 4-18
Operating mode with external pumping control and external speed control 4-19
Configuring speed ramp 4-20
Main Menu 4-20
‘1. Heating’ Menu 4-21
1.1 Heating zones 4-21
1.2 Sequential Heating 4-22
1.3 Inhibitions 4-22
1.4 Auto Standby - OFF 4-23
1.5 Extra temperature settings 4-24
‘2. General settings’ Menu 4-25
2.1 Password management 4-25
2.2 Extra settings 4-26
2.3 Configuration of input and output signals 4-27
2.4 Restore default values 4-27
‘3. Load’ Menu 4-28
Screen 1: Minimum adhesive level sensor 4-28
Screen 2: Automatic adhesive feeder 4-28
Screen 3: Dry air/gas injection 4-28
Screen 4: Pressurisation (only for units with an airtight tank lid) 4-29
‘4. Statistics’ Menu 4-29
Menu ‘5. Pumping’ 4-30
Automatic pumping block function 4-31
‘Automatic pumping block’ enabled 4-31
‘Automatic pumping block’ disabled 4-32
‘Turning off after resetting’ function 4-33
‘Turning off after resetting’ enabled 4-33
‘Turning off after resetting’ disabled 4-34