Meler Micron PUR LC, Instruction Manual

Page: 21 / 106

INSTALLATION
3-1
MA-5184-ENG PUR LC/MC ADHESIVE MELTER
Item Description Dimensions
A
EQUIPMENT LENGTH
LC 730mm
MC 740mm
B
EQUIPMENT WIDTH
LC 420mm
MC 520mm
C
EQUIPMENT HEIGHT
LC 630mm
MC 870mm
D
EQUIPMENT HEIGHT WITH LID OPEN
LC 910mm
MC 1215mm
E
EQUIPMENT LENGTH WITH ELECTRICAL CABINET OPEN
LC 920mm
MC 990mm
LONGITUD DEL EQUIPO CON SOPORTE PARA
VARIADORES DEL ARMARIO ELÉCTRICO ABATIDO
LC 1280mm
MC 1355mm
3. INSTALLATION
Warning: The melters/applicators are equipment with current technology and
with certain foreseeable risks. Therefore, only allow qualified personnel with
sufficient training and experience to use, install or repair this equipment.
Introduction
The ‘MICRON PUR’ series melters/applicators are delivered with all the
materials necessary for their installation. However, some components must
be provided by the user himself, according to the location and connections in
each particular installation:
• Anchoring screws for the melter/applicator equipment
• Power cord and plug for electrical power
• Pneumatic pipe and connection to the compressed air system
• Multicore cable for external electrical control
• Optionally, a gas ventilation system
Installation requirements
Before installing ‘MICRON PUR’ series melter/applicator equipment, we must
make sure that the space assigned to it permits installing, connecting and
using the entire system. Similarly, we must check to see that the electrical
and pneumatic supplies meet the necessary requirements of the melter/
applicator equipment being installed.
Free space