Meinberg LANTIME, Operating Instructions Manual

Page: 150 / 153

USB Stick
Via front panel Lantime supports a USB connector to plug in a USB Memory
Stick. This USB stick can be used for different tasks in combination with the
Lantime:
- Transfer configuration parameters between different Lantimes
- Keypad locking for secure using the keypad of the LCD
- Transfer of log files
- Transfer for full or incremental Software Updates
- Upload and download of secure certificates (SSL, SSH) and password
When connecting the USB stick to the Lantime the LC Display will change
automatically to the SETUP menu with the submenu „USB MEMORYSTICK“ and
the type of stick will be displayed:
If the Lantime found a special menu and file structure on the USB stick you will get
the new submenus by pressing the NEXT button. All these submenus will be defined
on the stick:
Menu Structure
The submenus with the corresponding commands are declared in special files on
the USB stick. These files will be loaded and interpreted by the Lantime. So it is
possible to build up your own configuration. The following diretory and file structure
have to be placed on the USB stick:
/Lantime/
Menu/
menu_1
script_for_menu_1
menu_2
script_for_menu_2
150
SETUP: USB MEMORYSTICK
copy configuration to memory stick
SETUP: USB MEMORYSTICK
USB: 0 USB DRIVE