Meinberg LANTIME, Operating Instructions Manual

Page: 44 / 153

The LANTIME configuration interfaces
The LANTIME offers three different options for configuration and status
management: Web interface, Command Line Interface Setup and SNMP. In order to
use the SNMP features of your LANTIME, you need special software like
management systems or SNMP clients. In order to use the web interface, all you need
is a web browser (LANTIME supports a broad range of browsers).
In addition to the SNMP and web interface, you can also manage your LANTIME
configuration via a command line interface (CLI), which can be used via a TELNET
or SSH connection. A setup tool can be started after login, just type “setup” and press
ENTER at the prompt.
There are only a few differences between the web interface and the CLI, most options
are accessible from both interfaces (the CLI has no statistical functions).
The above screenshots show the web interface and the Command Line Interface setup
tool. The CLI setup tool cannot be used by more than one user at a time, the web
interface can be used by more than one user in parallel, but the two or more running
sessions may influence each other. We explicitly do not recommend the parallel usage
of the configuration interfaces.
44