Meinberg LANTIME, Operating Instructions Manual

Page: 151 / 153

Menu Configuration Files
Every submenu will be defined by a spezial formated text file. The name of this file
has to be started with „menu_“. This file is an ASCII file which can be created by a
standard text editor with the following format:
# Comment
Menu-Name: get configuration from USB Stick
Menu-Type: default
Menu-Script: get_config_from_usb_stick
Menu-Pre-Cmd:
Menu-Post-Cmd:
With the key name „Menu-Name:“ the text in the LC display will be defined. The
„Menu-Type:“ will be always „default“ (not supported yet). The „Menu-Script“ will
define the real name of the script file which will be started if the submenu will be
activated with the CLR/ACK button. The following message will be displayed on the
LCD:
With the key names „Menu-Pre-Cmd:“ and „Menu-Post-Cmd:“ some special internal
commands can be activated before or after starting the script file. The following
commands are possible:
RELOAD_CONFIG: reload configuration file of the Lantime
REBOOT: reboot the operating system on Lantime
When connecting the USB stick to Lantime the filesystem of the USB stick will be
mounted to „/mnt/usb_storage“. This interface can be used to configure the menu and
script files.
151
copy configuration to memory stick
INC -> YES MENU -> NO