Meinberg LANTIME, Operating Instructions Manual

Page: 137 / 153

SNMP Location String [ASCII,50]:Germany
# Windows Messages Section
WMail Address 1 [ASCII,50]:
WMail Address 2 [ASCII,50]:
# VP100 Display Section
VP100 Display Address 1 [ASCII,50]:
VP100 Display Sernum 1 [ASCII,50]:
VP100 Display Address 2 [ASCII,50]:
VP100 Display Sernum 2 [ASCII,50]:
# Notification Section
Notification on NTP_not_sync [CASE]:
Notification on NTP_stopped [CASE]:
Notification on Server_boot [CASE]:
Notification on Refclock_not_respon.[CASE]:
Notification on Refclock_not_sync [CASE]:
Notification on Antenna_faulty [CASE]:
Notification on Antenna_reconnect [CASE]:
Notification on Config_changed [CASE]:
Notification on Leap second announ. [CASE]:
# Ethernet Parameter Section
ETH0 IPv4 TCPIP address [IP]:0
ETH0 IPv4 NETMASK [IP]:0
ETH0 DHCP CLIENT [BOOL]:1
ETH0 IPv6 TCPIP address 1 [IP]:
ETH0 IPv6 TCPIP address 2 [IP]:
ETH0 IPv6 TCPIP address 3 [IP]:
ETH0 IPv6 Autoconf [BOOL]:1
ETH0 Net Link Mode [NUM,0:4]:
ETH0 Bonding Group [NUM,0:4]:
Global Option File
This file contains all global options for special hardware configuration of the
LANTIME. Do not modify this file. You can find this file on the write protected flash
disk at /mnt/flash/global_options:
#GLOBAL OPTIONS
NUMBER ETHERNET INTERFACES: 1
SYSTEM LAYOUT: 0
SYSTEM ADV LAYOUT: 0
SYSTEM LANGUAGE: 0
SYSTEM PARAMETER: server
SYSTEM DESIGN: 0
137