Megger SG32-1500M, User Manual

Page: 44 / 76

M
SG32-UG-EN-V01 Dec 2016
34
the HV ON pushbutton’s (item 10) Green LED will illuminate. The unit will
remain in the SURGE test Mode.
9. To exit from this test Mode, push the SURGE button (item 19), which will
extinguish the green LED of the HV ON button (item 10). Both the SURGE
& PROOF/BURN test Mode pushbuttons’ Blue LEDs will light up,
indicating that the SELECT Mode switch is now unlocked and the user can
select among the 4 available test modes.
Switching off the unit
1. The PLC inside the SG32-1500M will be de-energized by pushing the
ON/OFF pushbutton (item 11; in this state the AC line voltage is still being
distributed to the EMERGENCY STOP button and the 24V internal power
supply, the unit is in a “power stand-by” mode.
2. The AC power to the SG32-1500M is
completely turned off
by pushing in
the Red Emergency Stop button (item 8)