Megger SG32-1500M, User Manual

Page: 66 / 76

M
SG32-UG-EN-V01 Dec 2016
56
Initial Set-up
Important:
When you receive your instrument or following an update you will be
asked if it is an MTDR100. Please answer as MTDR100 as this
will select the correct settings.
When you receive the instrument it will have certain parameters pre-set as the
“default”. To change these defaults and set up the instrument to satisfy
individual requirements follow the following procedure.
NOTE: All menus and submenus are accessed by turning the jog-dial until the
desired menu item is highlighted and then depressing the Jog-dial to select
the required item or sub-menu
Rotating the jog-dial = Select parameter, Menu or Sub-menu
Depress the jog-dial = Activate or de-active the selected item

Select and activate “Preferences” by turning
the jog-dial and depressing when over the
menu.

You will then see the following sub-menu
options.
 Scroll up to Configuration and select by
depressing jog-dial.