Megger SG32-1500M, User Manual

Page: 68 / 76

M
SG32-UG-EN-V01 Dec 2016
58
You will then be presented with the following
options:
 The MTDR comes with a standard data-base
of “typical” cables. These can be selected by
scrolling down and clicking/selecting the one
desired. This will then automatically set the
cable type and velocity factor for all
measurements taken on that setting. The
Default cable type may also be set.

In the event of a specific cable not being in
the database, you can add a cable type by
selecting (New/Edit/Delete Cable Type) and
then (New Cable Type) in the sub-menu. Fill
in the information fields by using the
Keyboard and the new cable type will be
added to the table. Unwanted cable types
may also be deleted from the table using this
menu.

Cancel : Takes the operator out the Cable
Type sub-menus back to Preferences menu.

Clear Data: Clear Data, removes all traces
from TDR screen, and returns operator back
to main menu.