Megger SG32-1500M, User Manual

Page: 63 / 76

Getting to know your MTDR100
SG32-UG-EN-V01 Dec 2016
53
Operator Menu Bar
7. Range: Allows operator to select required range.
Note: In TDR & ARC Reflection mode with
Auto
activated (by
depression of jog-dial) the system will automatically set the right cursor over
end of cable and set range. This should be seen as a guide only as spurious
multiple reflections could cause incorrect positioning of cursor.
8. Pulse Width: Manually set pulse width or select “Auto”.
9. Gain: Set gain (amplification) to be applied to trace.
10. Velocity: Set velocity factor of cable (library or custom).
11. Live Trace: Used to activate “continuous sampling” in TDR/Pulse Echo
modes (only available in TDR mode or when taking the
reference trace in Arc Reflection Multi-shot).
12. Trigger ON: Activates trigger/transient recorder for Arc Reflection, Current
Impulse, Loop off/Loop on
13. Cursors: Used to activate and move left and right cursors.
14. Arc Multi-shot: Select Arc Reflection Multi-shot to view up to 1024 traces.
(Range dependent)
15. View: Opens sub-menu to Zoom or Pan along trace.
16. Position: Allows the operator to move the trace vertically.
17. Mode: Sub-menu to select Arc Reflection, TDR, Current Impulse,
Loop off / Loop on
18. File: Access on-board file manager (save/upload/download).
19. Preferences: Access preferences sub-menu.
20. Exit:
Only on CAS-1 emulator software.
14
17 16 15 20 18 19
7 8 9 10 11 13 12
HV Trace #
TRIGGER ON
LIVE TRACE