Medisana 88310, Instruction Manual, Page: 41 / 154

GB
35
Application
You can de fi ne a normal program (U-01) and a burst program (U-02) yourself
in TENS mode for individual therapy. The following parameters are saved in
the process:
• Duration of the therapy
• Frequency
• Pulse
width
1. Select TENS therapy mode (see page 33).
2. Select one of the user programs U-01 or U-02 (see page 33).
3. Brie
fl y press the button “Set”. The display for the therapy duration will blink.
4. With one of the controls or set the desired therapy duration (10 to 90
minutes).
5. Brie fl y press the button “Set”. The display for the frequency will blink.
6. Set the desired frequency with one of the controls or :
• Normal program (U-01): 2 to 120 Hz
• Burst program (U-02): 0.2 to 5.0 Hz
7. Brie fl y press the button “Set”. The display will now display the pulse width.
8. With one of the controls or , set the desired pulse width (50 to 300 μ S).
9. Brie fl y press the button “Set”.
This program has now been saved and can be used like a preset program (see
page 33 and 34).
In EMS therapy mode, you can de fi ne a program yourself and save the follow-
ing parameters:
• Therapy
duration
• Frequency
• Pulse
width
• Increase/decrease time – Current intensity increases from zero to the de-
fi ned value or drops back to zero during this time.
• Continuous time – Current intensity is held.
• Pause time – pause for recovery.
C
u
rr
e
n
t i
n
te
n
si
ty
Time
Ramp
time
Ramp
time
Continuous time
Relax time
Dr
op
ti
m
e
1. Select EMS therapy mode (see page 33).
2. Select the user program U-01 (see page 33).
3. Brie
fl y press the button “Set”. The display of the therapy duration will
blink.
4. With one of the controls or , set the desired therapy duration (10 to 90
minutes).
5. Brie fl y press the button “Set”. The display for the frequency will blink.
6. With one of the controls or set the desired frequency (2 to 120 Hz).
7. Brie fl y press the button “Set”. The display will now show the pulse
width.
De fi ne TENS
program
De fi ne the EMS
program