M631 Precision RTD Simulator
MEATEST
43
Operation manual
[:SOURce]:NICKel:ZRESistance
Syntax:
[:SOURce]:NICKel:ZRESistance <DNPD>[<UNIT>]
[:SOURce]:NICKel:ZRESistance?
Description:
This command sets resistance at 0 °C for Nickel function.
Parameters:
<DNPD>
Range 100.0 ... 1000.0 (default 100.0).
<UNIT>
{OHM}
·OHM
Remarks:
Overlapped command
Value is set according to “Startup” preset on restart and to default on *RST command
Example:
NICK:ZRES 100.0
NICK:ZRES? Response: 1.02 OHM
[:SOURce]:PLATinum[:AMPLitude]
Syntax:
[:SOURce]:PLATinum[:AMPLitude] <DNPD>[<UNIT>]
[:SOURce]:PLATinum[:AMPLitude]?
Description:
This command sets temperature in Platinum mode. Node SOUR:PLAT also selects
“PLATINUM” function if not already selected. If unit parameter is part of temperature,
new unit is set.
Parameters:
<DNPD>
temperature at Platinum function. Default value is 100.0 °C.
<UNIT>
{CEL|FAR|K}
·CEL
degrees of Celsius
·FAR
degrees of Fahrenheit
·K
Kelvin
Remarks:
Overlapped command
Value is set according to “Startup” preset on restart and to default on *RST command
Example:
PLAT 100.0
PLAT? Response: 1.02 CEL
[:SOURce]:PLATinum:COEFficient
Syntax:
[:SOURce]:PLATinum:COEFficient <DNPD>,<DNPD>,<DNPD>
[:SOURce]:PLATinum:COEFficient?
Description:
This command allows to define Coefficients (A, B, C) used for “User” Platinum standard
scale.
Parameters:
<DNPD>
Range 3.0e-3 ... 5.0e-3 (default 3.9083e-3), Coefficient A
<DNPD>
Range -7.0e-7 ... -5.0e-7 (default -5.775e-7), Coefficient B
<DNPD>
Range -5.0e-12 ... -3.0e-12 (default -4.18301e-12), Coefficient C
Remarks:
Overlapped command
Value is set according to “Startup” preset on restart and to default on *RST command
Example:
PLAT:COEF 3.9083e-3,-5.775e-7,-4.18301e-12
PLAT:COEF? Response: 3.908300E-03,-5.775000E-07,-4.183010E-12
[:SOURce]:PLATinum:STANdard
Syntax:
Summary of Contents for M631
Page 1: ...M631 Precision RTD Simulator Operation manual ...
Page 2: ......
