manualshive.com logo in svg

MDT SCN-RT1GS.01, Technical Manual

Share
Download
MDT SCN-RT1GS.01 Technical Manual Download Page 94

SCN-RT1GW.01

SCN-RT1GS.01

MDT Glass RTC

 MDT Glass Room Temperature Controller 1-fold with LCd display, lush mounted

Version

SCN-RT1GW.01

Room Temperature Controller 1-fold with LCD display

Flush mounted, White

SCN-RT1GS.01

Room Temperature Controller 1-fold with LCD display

Flush mounted, Black

The MDT Glass Room Temperature Controller is used to control the indoor temperature, it has a working range from 
 -10 to +50°C. The MDT Glass Room Temperature Controller detects the temperature and releases telegrams in  
dependence on its parameterisation. 

The characteristic of the MDT Glass Temperature Controller (Two-position, PI and PWM control) can be set in the ETS3/4. 
The MDT Glass Room Temperature Controller stores the minimum and maximum temperature and releases an alarm  
telegram if the temperature differs from the programmed limit values. The temperature of the frost protection is  
parameterizable. 

The large LCD display optionally shows inside/outside temperature, the desired value and the current time.  

Also user deined messages and 14byte telegramms from the KNX bus can be displayed.

The MDT Glass Room Temperature Controller is a lush mounted device for ixed installations in dry rooms.

For project design and commissioning of the MDT Glass Room Temperature Controller it is recommended to use the  
ETS3f/ETS4 or later. Please download the application software at www.mdt.de/Downloads.html 

•  Production in Germany, certiied according to ISO 9001
•  

Large LCD Display (with automatic light intensity control)

•  Room temperature controller with temperature sensor -10 to +50°C
•  Comfort-/night-/standby-/frost protection operation
•  Selectable temperature controller (PI, Two-position, PWM)
•  Status feedback by HVAC and RHCC status objects
•  Limit values min/max, frost-/heat protection alarm, min/max memory
•  Given value is stored at voltage failure

•  Indication of inside/outside temperature, desired value and time  
•  Indication of user deined messages (1bit)
•  Indication of text telegramms (14byte)
•  Two direct switching functions (e.g. light, shutter)
•  Ventilation functions (hand or automatic)

•  Dimensions (W x H): 92mm x 92mm
•  Recommended mounting height: 1,6m

 

•  Integrated bus coupling unit  
•  3 years warranty

MDT technologies GmbH

 

•

 51766 Engelskirchen 

•

 Papiermühle 1 

Tel.: + 49 - 2263 - 880 

•

 

Fax: + 49 - 2263 - 4588 

•

 

[email protected] 

•

 www.mdt.de

Stand: 0314

DIN EN ISO 9001

TAW Cert

 

Zert.Nr.1905606

N

Summary of Contents for SCN-RT1GS.01
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands