Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
84
8.2.2 Scene
The scene function calls scenes, which are saved in actuators. Scene numbers in the push button and
the actuators must be identical. It is possible to save scenes by a long keystroke if the saving function
was activated.
The following illustration shows the setting options for this parameter:
Figure 43: Scene function
The table shows the available settings for the parameter scene:
ETS-text
Dynamic range
[default value]
comment
Subfunction
no save
save
Saving function can be selected
via a long key stroke
Scene number
1-64
[1]
Scene number must be
identical with the one in the
actuator
Table 71: Scene function
The following table shows the available communication objects:
Number
Name
Length
Usage
63
Scene
1 Byte
calls the adjusted scene
Table 72: Communication object - scene function
The scene function calls scenes, which were stored in actuators. Scenes contain of parameterized
states of several actuators, which can be called with only one keystroke by using the scene function.
Additional to the call of scenes, scenes can be saved at the call of a push button by a long keystroke.
When the saving function was activated, a long keystroke at the push button saves the current state
of the actuators to the depending scene.
