MDT SCN-RT1GS.01, Technical Manual

Page: 29 / 95

Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• knx@mdt.de • www.mdt.de
29
The following table shows the available settings for the LCD-Display:
ETS-text
Dynamic range
[default value]
comment
Standby-Display at Day/Night

switched off

only actual temperature

only time

only outside temperature

actual temperature and
time

actual temperature and
outside temperature

time and outside
temperature

actual temperature and
outside temperature,
time
defines the functional block, which is
displayed in standby
Change time between function
blocks never-60s
[2s]
defines how long a functional block
(temperature, time or outside
temperature) is shown; is only kept if
the standby-mode shows more than
one functional block
Time until Display changes into
standby never-60s
[20s]
defines the time between the last key
press and activating of the standby-
mode
Shown functional blocks

Temperature controller

Ventilation control

Temperature controller
and function

Temperature controller
and ventilation control

Ventilation control and
function

Temperature controller,
ventilation control and
function
defines the functional blocks, which can
be controlled via the display
Representation after standby

Function

Temperature controller

Ventilation control
defines the functional block, which is
called after a reset, only active blocks
can be chosen
Show function buttons in
standby

No

Yes
defines if the buttons C/D should be
shown in the standby mode
Table 11: Display Settings