Technical Manual Glass Room Temp. Contr. SCN-RT1Gx.01
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
81
8.1.3 Switch
The values for on and off can be assigned freely at the switching function for the grouped channels.
If you adjust a pair of channel as switch, the following parameters will be shown:
Figure 41: Buttons grouped - Switching
Simple functions, like an alternating circuit, can be programmed easily by using the grouped switch
function. The 1 bit communication object sends in dependence of the parameterization a 0- or a 1-
signal for the first button and the inverted signal for the second channel. So you can chose which
channel should switch off and which should switch on.
The following chart shows the corresponding communication object:
Number
Name
Length
Usage
61
Switch On/Off
1 Bit
Switching object for the grouped switching
function
Table 65: Communication object - grouped switching
