Technichal Manual Heating Actuators AKH
MDT technologies GmbH •
51766 Engelskirchen
• Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
16
4 Reference ETS-Parameter
4.1 Setup general
The general settings are shown at the illustration below. These settings are valid for all channels:
Figure 8: Setup general
4.1.1 Device configuration
The following both parameters are for the configuration of the actuator:
Figure 9: Device configuration
The following chart shows the dynamic range of this parameter:
Sub function
Dynamic range
[default value]
comment
Startup delaytime
0-60s
[0s]
Time, which elapses between bus
power reset and the restart of the
device
Thermal driving
24V
230V
Adjustment of the voltage level at
the thermal drivings
Table 7: Device configuration
