Technichal Manual Heating Actuators AKH
MDT technologies GmbH •
51766 Engelskirchen
• Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49
-2263-4588
• [email protected] • www.mdt.de
12
The chart shows the available objects:
Nr.
Function
Usage
0
Control value
Input for external control value
In, Write
1
Flow temperature
Adjustment of the limitation of the
flow temperature
In, Write
2
Block
blocks the channel
In, Write
3
State control value
sends the current value of the control
value
Out, Read
4
Message emergency
mode
indicates an active emergency mode
Out, Read
5
Forced position
activates the forced position
In, Write
5
Dew point alarm
activates the dew point alarm
In, Write
Table 4
: Co
u i atio o je ts „ o ti uous 1B te
3.3.3 Communication objects
–
integrated controller
If a channel is selected as integrated controller, the following objects, depending to the
parameterization, will be shown:
Figure 7
: Co
u i atio o je ts „i tegrated o troller
Because of the control value is created by the integrated controller itself, no object for the control
value is shown. Instead of this, an object for the temperature measurement (Input) is shown.
