Pellet
32
5-PRECAUTIONS BEFORE START-UP
This will prevent damaging the welds and the steel structure.
DO NOT EXPECT HEATING EFFICIENCY IMMEDIATELY!!!
ATTENTION!
If during operation or initial ignition you encounter smoke spillage in to the room from the appliance
or the flue then please switch off the appliance, ventilate the room and contact the installation / service
engineer immediately.
LOADING THE PELLETS
Fuel loading is achieved via the lateral or frontal door to be fitted on the cladding, which enables access to the fuel loading chute.
The loading procedure is facilitated if performed in several steps as described below:
• open the door and pour half the contents directly from the sack or using the supplied scoop (A) onto the chute.
• Wait for the pellets accumulated on the chute to enter the hopper.
• Complete the operation by pouring the second half of the sack with the same procedure.
No other type of fuel other then pellets, in compliance with above-mentioned specifications, is to be inserted into
the hopper.
SCOOP A
