McConnel ROBOPOWER 111300001, Operator'S Manual

Page: 81 / 96

77
9.10.4 - HYDRAULIC OIL LEVEL
The control of the hydraulic oil level is done throu-
gh the (a) visual on the side of the tank.
Oil control the machine must be on a level site.
If the level of oil appears to be little or no visibie,
top up as soon as possible.
To top up the hydraulic oil tank unscrew the cap
(b) with the appropriate security key and pour oil
up to the level reset.
Always replace the cap with the key.
DANGER :
Restore the oil level of the hydraulic circuit after turning off the engine diesel and ha-
ving closed all the cylinders of the arm.
When you run the topping wear protective clothing.
WARNING :
Do not add oil beyond the MAX level, this situation could lead to leaks from tank. Restore the
level only with hydraulic oil as shown in the list (see 9.4).
When using biodegradable oil Panolin HLP Synth E, there shall be no mixing with other oils.
The use of oils and / or grease not provided will invalidate the warranty.
a
b
- McCONNEL ROBOPOWER -