62
When the machine maneuver over an obstacle, a
space is created between the bearing roller and the
track. This can cause the track to come off its seat.
The same situation can occur in reverse when a
space is created between bearing roller, idler roller,
and track. to eliminate this risk, track guides are
provided on the front part of the undercarriage.
If the machine changes direction, and the track
cannot move sideways due to the presence of an
obstacle, there is a risk that the track can be da-
maged or come off its seat; whenever possible
avoid turning the machine when it is against an
obstacle, if unavoidable, make maneuvers slowly
and gradually until clear of the object.
DANGER :
TO AVOID SERIOUS INJURY OR DEATH FROM SLIDING OR EQUIPMENT
ROLLOVER:
Never attempt to operate the machine with metal cleats or spiked track on concrete
hillsides or hard hillside surfaces. Operation of the spiked or cleated track on con-
crete or hard surface hillsides could result in sudden and violent loss of traction and
control of the machine and may result in serious injury or death.(oltre 20 m)
6.11 - PLACE OF CONTROL - WORK AREA OPERATOR
WORK AREA ALLOWED
WORK AREA ALLOWED
The operator must always be at at least 5m from
the machine. It is appropriate that the operator is
provided with the device DPI.
The operator must attempt to position himself in
relation to the recommended cones of work, both
to avoid being outside of the area of translation
of the same that in the area of possible ejection
of objects.
60°
60°
60°
60°
- McCONNEL ROBOPOWER -
Summary of Contents for ROBOPOWER 111300001
