Worksaver SBC-2160, Owner'S/Operator'S Manual

Page: 1 / 40

Snow Blades for
Skid Steer and
Tractor Front Loaders
Safety Instructions Assembly & Mounting
Tractor Preparation Maintenance
Operating Instructions Repair Parts
OWNER’S /
OPERATOR’S
MANUAL
MODEL NO.’s
SBMS-50
SBMS-50 B/G
SBC-2160
SBC-2172
SBS-2160
SBS-2172
SBJD-2160
SBJD-2172
SBFL-2160
SBFL-2172
SBS-2790A
SBS-27108A
SBJD-2790A
SBJD-27108A
SBFL-2790A
SBG-2790A
SBG-27108A
SBFL-27108A
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
Model SBS-2790A Shown
CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
1. Select an area for assembly that is clean and free of any
debris which might cause persons working on the
assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack,
tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your operator’s
manual before proceeding further.
4. If the assembly instructions call for parts or assemblies to
be blocked up, use only blocking material that is in good
condition and is capable of handling the weight of the
assembly to be blocked. Also insure that the blocking
material is on a clean, dry surface.
5. Never put hands, or any part of body, under blocked up
assemblies if at all possible.
6. After completing assembly, thoroughly inspect the
machine to be sure that all nuts, bolts, hydraulic fittings
or any other fastened assemblies have been thoroughly
tightened.
7. Before operating the machine, thoroughly read the
operation section of your operator’s manual.
8. Before operating, read the maintenance section of your
operator’s manual to be sure that any parts requiring
lubrication, such as gearboxes, are full, to avoid any
possible damage.
9. Before operating equipment – If you have any
questions regarding the proper assembly or
operation, contact your dealer or representative.