68
9 - SERVICE
ATTENTION :
The operations of maintenance must be carried out exclusively by the service
Always wear protective equipment before performing any operation on the ma-
chine.
To obtain from the machine the best performance and ensure all the organs maximum duration, it
is necessary that the norms of use and maintenance are scrupulously followed by the people
responsible for the machine.
It is advisable that the customers, in their own interests, read with attention this note and consult
the manual every time they have the necessity of suggestions to eliminate any eventual problem.
Because the machine operates normally in contact with water, sand, earth, etc., a regular lubrica-
tion is necessary, which assume a vital importance not only for a long use of the machine, but also
*"}
M
F&RQQHO
Service
'HSDUWPHQW
(Tel.
).
9.1 - PREMISE
9.2 - GENERAL NORMS
- Before carrying out any operation of maintenance, verify and/or check the machine, switch off
the engine and remove the key of ignition from the cabin.
- During the disassembly and the assembly of the pieces of the machine, always use extractors,
- To unblock parts solidly adherent, use hammers of copper or hammers of wood.
- Separate distinctly the pieces in the various groups and partially retighten the nuts on the own
spine or welding. Clean the pieces with brushes or cloths therefore wash with oil or hot water
taking away the residues with air compressed.
- After sanding or drilling with abrasive bodies, accurately wash the parts ensuring the complete
taking away of the abrasive dust.
- In the assembly of the various pieces, ensure that they are clean and therefore lubricate
adequately.
- Pay the maximum attention to the rings of safety and to the machine pins, if they present
traces of breaking proceed to the immediate substitution.
- The operations of maintenance of the loader must be carried out by authorized personnel and
reported in the paragraph “register of the maintenance” on the presented action.
- McCONNEL ROBOPOWER -
Summary of Contents for ROBOPOWER 111300001
