Mazda MX-30 2022 Owner'S Manual Leaflet Download Page 478

Page: 478 / 546

Display

*1*2*3

Content

Action to be taken

Traffic Jam Assist Opera-
tion Canceled Drive
Safely

This message is indicated when the
Traffic Jam Assist (TJA) have been can-
celed other than by the driver.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Distance & Speed Alert
Operation Canceled
Drive Safely

This message is indicated when the
Distance & Speed Alert (DSA) have
been canceled other than by the driv-
er.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Cruise Control Opera-
tion Canceled. Drive
Safely

This message is indicated when the
Cruise Control have been canceled
other than by the driver.

Have your vehicle inspected by an
Authorized Mazda Dealer.

Emergency Braking Acti-
vated. Depress Brake
Pedal to Hold Stop

This message is indicated after the
Smart Brake Support (SBS) brakes op-
erate and when the SBS is canceled.

Depress the brake pedal.

Touch Key Fob to Push
Button Start Switch

This message is indicated when the
key battery is weak (battery dead or
damaged key).

Touch the key against power switch
to start the EV system.
Refer to Starting the EV System When
the Key Battery is Dead on page 4-6.

Depress Brake Pedal to
Start Vehicle

This message is displayed when the
power switch is pressed without de-
pressing the brake pedal.

To start the EV system, press the pow-
er switch with the brake pedal de-
pressed.

Check Shift Selector Lev-
er Position

Displays in the following cases:



Selector lever is shifted to R posi-
tion while driving forward.



Selector lever is shifted to P posi-
tion while driving.



Selector lever is shifted to D posi-
tion while reversing.

Check the selector lever position.

Close Door and Fasten
Seat Belt

This message is indicated when the
AUTOHOLD switch is pressed with
the driver’s seat belt unfastened or
the driver’s door open.

Fasten the driver's seat belt and press
the AUTOHOLD switch with the driv-
er’s door closed.

Wiper Blades Must Be
on Windshield Before
Operating

This message is indicated when the
power switch is switched ON with
the wiper arms at the service posi-
tions.

Return the wiper arms to the initial
positions.

Windshield Wiper Range
of Motion Reduced. Re-
move Obstruction(s)

This message is indicated when there
is snow or dirt accumulation on the
windshield and the wiper operation
range is narrowed.

Remove foreign matter from the
windshield.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-34

MX-30_8JD4-EA-21G_Edition4_new

2021-8-5 15:25:29

Summary of Contents for MX-30 2022



































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-30 2022

Reviews:

Related manuals for MX-30 2022

Brands by name

Popular brands

Mazda MX-30 2022, Owner'S Manual Leaflet

Search results

Summary of Contents for MX-30 2022

Reviews:

Related manuals for MX-30 2022

Brands by name

Popular brands