Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 270 / 546

▼
Setting the System
Operation switch
1. CANCEL switch
2. RES switch
3. TJA switch
Operation conditions
Headway control function
The headway control operates when all of the following conditions are met.

The TJA is on.

The selector lever is in the D position.

The parking brake is released.

All the doors are closed.

The driver's seat belt is fastened.

Vehicle speed is 0 to 140 km/h (0 to 87 mph)
Steering assist function
The steering assist function operates when all of the following conditions are met.

The headway control function is operating.

The vehicle is being driven at a speed of less than about 56 km/h (35 mph).

When driving near the center of the lane and the white (yellow) lane lines on both
sides are detected clearly, or a vehicle ahead is detected clearly in front of your
vehicle.

The steering wheel is not turned sharply.

The turn signal lever is not operated.
NOTE

The steering operation assist is performed so that the vehicle remains near the
center of the driving lane, however, depending on conditions such as the road
curvature, road slope and undulations, and vehicle speed, the function might not
be able to keep the vehicle near the center of the driving lane.

Under the following conditions, the TJA cannot be used when the vehicle speed is
30 km/h (20 mph) or slower.

The Forward Sensing Camera (FSC) cannot detect target objects.

There is a problem with the Electric Parking Brake (EPB).
When Driving
i-ACTIVSENSE
4-122
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29