Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 257 / 546


A vehicle overtakes your vehicle
while it is stopped.

Your vehicle is in an area where
strong radio waves or electrical
noise may occur such as near a
television tower or power plant.

In the following cases, the
i-ACTIVSENSE warning indication/
warning light turns on and operation
of the system is stopped. If the
i-ACTIVSENSE warning indication/
warning light remains illuminated,
have the vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.

Some problem with the system
including the Blind Spot
Monitoring (BSM) warning
indicator lights has occurred.

A large deviation in the installation
position of a rear side radar sensor
on the vehicle has occurred.

There is a large accumulation of
snow or ice on the rear bumper
near a rear side radar sensor.

Driving on snow-covered roads for
long periods.

The temperature near the radar
sensors becomes extremely hot
due to driving for long periods on
slopes during the summer.

The lead-acid battery voltage has
decreased.

Under the following conditions, the
rear side radar sensor cannot detect
approaching vehicles or it might be
difficult to detect them, and the
system may not operate normally.

The vehicle speed when reversing
is about 15 km/h (9 mph) or
faster.

The rear side radar sensor
detection area is obstructed by a
nearby wall or parked vehicle.
(Reverse the vehicle to a position
where the radar sensor detection
area is no longer obstructed.)
1. Your vehicle

A vehicle is approaching directly
from the rear of your vehicle.
1. Your vehicle

The vehicle is parked at an angle.
1. Your vehicle

Directly after the RCTA system
becomes operable using [Settings]
in Mazda Connect.

Radio wave interference from a
radar sensor equipped on a nearby
parked vehicle.
When Driving
i-ACTIVSENSE
4-109
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29