Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 145 / 546

CAUTION

Chains may affect handling.

Do not go faster than 50 km/h (30
mph) or the chain manufacturer's
recommended limit, whichever is
lower.

Drive carefully and avoid bumps,
holes, and sharp turns.

Avoid locked-wheel braking.

Do not use chains on a temporary
spare tire; it may result in damage to
the vehicle and to the tire. Your
vehicle is not equipped with a
factory installed temporary spare tire.

Do not use chains on roads that are
free of snow or ice. The tires and
chains could be damaged.

Chains may scratch or chip
aluminum wheels.
NOTE

The tire pressure monitoring system
may not function correctly when
using tire chains.
Install the chains on the front tires only.
Do not use chains on the rear tires.
Please consult an Authorized Mazda
Dealer.
Installing the chains
1. Secure the chains on the front tires
as tightly as possible.
Always follow the chain
manufacturer's instructions.
2. Retighten the chains after driving
1/2
―
1 km (1/4
―
1/2 mile).
Overloading
▼
Overloading
WARNING
Be careful not to overload your
vehicle:
The gross axle weight rating (GAWR)
and the gross vehicle weight rating
(GVWR) of the vehicle are on the
Motor Vehicle Safety Standard Label
on the driver's door frame. Exceeding
these ratings can cause an accident or
vehicle damage. You can estimate the
weight of the load by weighing the
items (or people) before putting them
in the vehicle.
Before Driving
Driving Tips
3-59
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29