Mazda MX-30 2022 Owner'S Manual Leaflet Download Page 391

Page: 391 / 546

Interior Lights

▼

Interior Lights

NOTE

Do not leave the lights on for long
periods while the EV system is
stopped. Otherwise the lead-acid
battery power could be depleted.

Overhead lights

Front

1. Indicator light

Switch

Overhead Lights

ON/OFF

Press the switch to turn it on.
Press the switch again to turn off
the lights.

Switch

Overhead Lights

DOOR OFF

The door interlock can be switch-
ed ON/OFF.
When the door interlock is OFF,
the indicator light in the switch
turns on.

Door interlock ON (indicator
light in switch is off)



The lights turn on when any of
the doors is opened.



The lights turn on/off in con-
junction with the illuminated
entry system.

Rear

(Vehicles without rear map lights)

(Vehicles with rear map lights)

NOTE

The rear overhead light also turn on
and off when the front overhead light
switch is operated.

Interior Features

Interior Equipment

5-37

MX-30_8JD4-EA-21G_Edition4_new

2021-8-5 15:25:29

Summary of Contents for MX-30 2022



































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-30 2022

Reviews:

Related manuals for MX-30 2022

Brands by name

Popular brands

Mazda MX-30 2022, Owner'S Manual Leaflet

Search results

Summary of Contents for MX-30 2022

Reviews:

Related manuals for MX-30 2022

Brands by name

Popular brands