manualshive.com logo in svg

Mazda MX-30 2022, Owner'S Manual Leaflet

The Mazda MX-30 2022 Owner's Manual Leaflet is your go-to manual for all the information you need about your vehicle. Download this comprehensive manual for free from manualshive.com to ensure you have all the necessary instructions and guidance to get the most out of your Mazda MX-30 2022.

Share
Download
background image

Display

*1*2*3

Content

Action to be taken

Battery Heating Can-
celed Due to Five Days
of Vehicle Inactivity Turn
Battery Heater Off If Ve-
hicle Will Not Be Driven

This message is displayed when the
EV system is started after the battery
heater has operated for a long time
and stopped automatically.

If the vehicle is not used for long pe-
riods, set the battery heater to off.

High Voltage Battery
Charging Interrupted

This message is displayed when the
charging is interrupted.

Check the connection status of the
charge connector.

Rising EV System Temp.
Acceleration May Be
Limited Avoid Moving at
Very Low Speeds. De-
press Brake When Not
Moving

This message is indicated when the
vehicle is held in the stopped posi-
tion with the accelerator pedal oper-
ated, such as on an upslope, and the
motor reaches a high temperature.

Depress the brake pedal.

Regenerative Braking Is
Limited

This message is indicated when the
regenerative braking is restricted.

Drive the vehicle carefully because
the regenerative braking force de-
creases.

Shift Into Park Before Ex-
iting Vehicle

This message is indicated when the
driver’s door is opened with the se-
lector lever in a position other than
the P position.

Close the driver’s door or shift the se-
lector lever to the P position.

Battery Saving Mode.
Drive Vehicle to Charge
12V Battery

This message is indicated when the
power consumption exceeds a cer-
tain amount such as by repeatedly
opening/closing the doors or the lift-
gate when the power switch is
switched OFF.
Some of the functions are restricted
to reduce power consumption.

There is no need to contact an Au-
thorized Mazda Dealer. Drive the ve-
hicle for 5 minutes or longer to
charge the 12V battery. The warning
message will clear just after starting
the EV system.

*

1

A pop-up is displayed when a warning occurs.

*

2

One screen displays four rows. If the entire message cannot be displayed on the screen, it switches to
another screen.

*

3

The displayed content may differ from the actual vehicle.

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

7-36

MX-30_8JD4-EA-21G_Edition4_new

2021-8-5 15:25:29

Summary of Contents for MX-30 2022



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-30 2022

Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
Calix M5T 187A Assembly Instructions preview
M5T 187A
Brand: Calix Pages: 5
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4
Mazda 2016 CX3 Service Information preview
2016 CX3
Brand: Mazda Pages: 3
Calix M5T 204 Assembly Instructions preview
M5T 204
Brand: Calix Pages: 4
Porsche 928 GTS 1994 Owner'S Manual preview
928 GTS 1994
Brand: Porsche Pages: 127
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Cadillac 2000 Escalade Manual preview
2000 Escalade
Brand: Cadillac Pages: 339
Stanley GLPS Instruction Manual preview
GLPS
Brand: Stanley Pages: 6

Brands by name

Popular brands

Load more brands