Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 290 / 546


When any of the following
conditions is met, the Rear Crossing
detection function will not detect
approaching vehicles or they may be
difficult to detect.

The rear side radar sensor
detection area is obstructed by a
nearby wall or parked vehicle.
(Reverse the vehicle to a position
where the radar sensor detection
area is no longer obstructed.)
1. Your vehicle

A vehicle is approaching directly
from the rear of your vehicle.
1. Your vehicle

The vehicle is parked on a slant.
1. Your vehicle

A vehicle is approaching from the
opposite direction on a steep
gradient.
1. Your vehicle

Directly after the EV system starts.

Just after the SBS operation has
been enabled using [Settings] in
Mazda Connect.

Radio wave interference from a
radar sensor equipped on a vehicle
parked nearby.

When any of the following
conditions is met, the Rear Crossing
may operate.

There is a hanging curtain or
railroad crossing gate.

Reversing near objects such as
foliage, barriers, vehicles, walls, or
fences.

The vehicle is driven on rough
roads such as in areas where there
is grass and foliage or off-road.

When reversing through low gates,
narrow gates, car washing
machines, or tunnels.

A towing bar is installed or a trailer
is connected.

If the system performs brake control
and the vehicle is stopped, the
system will continue to hold the
brakes for a brief time unless there is
an operation performed by the
driver.
Collision warning
If there is the possibility of your vehicle
colliding with a vehicle approaching
from the rear on the left or right, or
When Driving
i-ACTIVSENSE
4-142
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29