Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 27 / 546

6. Do the following operation within 5
seconds after the sound is activated
to program the driving position.

Programming to a position
memory switch
Press the switch you want to
program, either 1 or 2 switch.

Programming to the transmitter
Press the unlock switch on the
transmitter.
A sound is activated when the
operation is completed correctly.
NOTE

If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.

If the angle of the outer mirrors only
changes a little, the angle of the
outer mirrors may not have been
programmed correctly.

If the angle of the outer mirrors is
adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Calling up the programmed driving
position
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The seat
moves automatically while the seat
memory function is operating and
fingers or hands could get pinched and
injured.
NOTE

When adjustment of the driving
position is not necessary, a sound is
not activated.

The driving position adjustment is
canceled in the following cases:

The seat adjustment switch on the
driver's seat is operated.

The angle of the outer mirrors is
adjusted.

The SET switch is pressed.

Programming switch 1 or 2 is
pressed.

The lock switch or unlock switch
on the transmitter is pressed.

The vehicle starts moving.

The active driving display is
adjusted.

The selector lever is shifted to a
position other than P.

The walk in switch is operated.
Using the position memory switch
1. Make sure the parking brake is on.
2. Make sure the selector lever is in
the P position.
3. Switch the power switch ON.
4. Press the programming switch for
the driving position you want to call
up (switch 1 or 2).
5. A sound is activated when the
adjustment to the programmed
driving position is completed.
Using the transmitter
1. Unlock the driver's door using one
of the following methods.

Touch the sensing area of the
door release touch sensor.

Press the unlock switch on the
transmitter.
2. When you open the driver's door
within 90 seconds after unlocking
the doors, the adjustment of the
following parts starts.

Driver's seat

Active driving display (When the
power switch is switched ON, the
Essential Safety Equipment
Seats
2-11
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29