Mazda MX-30 2022, Owner'S Manual Leaflet

Page: 287 / 546


The vehicle is driven on rough
roads such as in areas where there
is grass and foliage or off-road.
Refer to Stopping the Smart Brake
Support (SBS) System Operation
on page 4-143.

Always use tires for all wheels that
are of the specified size, and the
same manufacture, brand, and tread
pattern. In addition, do not use tires
with significantly different wear
patterns on the same vehicle. If such
improper tires are used, the SBS may
not operate normally.
Rearward detection function
The rearward detection function is
designed to reduce damage in the
event of a collision with a target object
when reversing.
The rearward detection function
detects obstructions using the rear
ultrasonic sensors. In addition, if there
is the possibility of your vehicle
colliding with a target object at the rear
while you are driving in reverse, you
are notified of possible danger by a
warning sound and a warning
indication on the display.
Furthermore, if the possibility of a
collision increases, brake control is
performed to reduce damage in the
event of a collision.
WARNING
Always check the surrounding area
visually when reversing the vehicle:
The operation of the rearward
detection function has certain
limitations. Therefore, the function
might not operate or it might be
delayed even if there is a target object
at the rear of your vehicle. Always
make it your responsibility as a driver
to check the rear.
Operation conditions
The rearward detection function
operates when all of the following
conditions are met.

The EV system is operating.

The SBS is on.

The selector lever is in the R position.

The vehicle speed is about 2 km/h
(2 mph) to 8 km/h (4 mph).

There is no problem with the DSC.

The Electric Parking Brake (EPB) is
not operating.
NOTE

When any of the following
conditions is met, the rearward
detection function may not operate.

Directly after the EV system starts.

The height of the obstruction is
low such as low walls or trucks
with low loading platforms.

The height of the obstruction is
high such as trucks with high
loading platforms.

The obstruction is not as large as a
vehicle or wall.

The obstruction is thin such as a
signpost.

The surface of the obstruction is
not pointed vertically relative to
your vehicle.
When Driving
i-ACTIVSENSE
4-139
MX-30_8JD4-EA-21G_Edition4_new 2021-8-5 15:25:29