Mazda CX-7 Navigation System Owner'S Manual Download Page 413

Page: 413 / 522

Black plate (413,1)

The quality designation SM, or ILSAC
must be on the label.

–30 –20 –10

–20

100 120

5W-30

Inspecting Engine Oil Level

2.3-liter engine

1. Be sure the vehicle is on a level

surface.

2. Warm up the engine to normal

operating temperature.

3. Turn it off and wait at least 5 minutes

for the oil to return to the oil pan.

4. Open the cap.

5. Pull out the dipstick, wipe it clean, and

reinsert it fully.

Max

Min

6. Pull it out again and examine the level.

The level is normal if it is between
MIN and MAX.
If it is near or below MIN, add enough
oil to bring the level to MAX.

CAUTION

Do not add engine oil over MAX. This
may cause engine damage.

7. Make sure the O-ring on the dipstick is

positioned properly before reinserting
the dipstick.

8. Reinsert the dipstick fully.

9. Close the cap.

Maintenance and Care

Owner Maintenance

8-21

CX-7_8CG3-EA-11J_Edition1 Page413
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands