Mazda CX-7 Navigation System Owner'S Manual Download Page 327

Page: 327 / 522

Black plate (327,1)

Say:

[Beep]

“

Edit

”

Prompt:

“

Please say the name of the

entry you would like to edit or say,

“

List names

”

Say:

[Beep]

“

XXXXX... (Ex.

“

Mary's

phone

”

)

”

(Say the voice tag for the

registered name to be edited in the
phonebook.)

Prompt:

“

Home, Work, Mobile, or

Other?

”

Say:

[Beep]

“

Home

”

(Say the

registered location to be edited:

“

Home

”

“

Work

”

“

Mobile

”

, or

“

Other

”

Prompt:

“

XXXXX... (Ex.

“

Mary's

phone

”

) (Registered voice tag) XXXX

(Ex.

“

Home

”

) (Registered location). Is

this correct?

”

10.

Say:

[Beep]

“

Yes

”

11.

Prompt:

“

The current number is

XXXXXXXXXXX (Ex.

“

555-1234

”

)

(Currently registered number). New
number, please.

”

NOTE

If there was no previous phone number
registered to a location (Ex.

“

Work

”

), the

prompt will only read out

“

Number, please

”

12.

Say:

[Beep]

“

XXXXXXXXXXX

(Ex.

“

555-5678

”

)

”

(Say the new

phone number to be registered.)

13.

Prompt:

“

XXXXXXXX (Telephone

number) After the beep, continue to
add numbers, or say Go-Back to re-
enter the last entered numbers, or
press the Pick-Up button to save the
number.

”

14.

(Number Change)

Press the pick-up button, then go to
Step 15.

(Adding/inputting telephone
number)

Say,

“

XXXX

”

(desired telephone

number), then go to Step 13.

(Telephone number correction)

Say,

“

Go Back

”

. The prompt replies,

“

Go Back. The last entered numbers

have been removed. Number, please.

”

. Then go back to Step 12.

15.

Prompt:

“

Number changed.

”

(With 7-inch navigation system)

1. Press the pick-up button or talk button

with a long press.

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

Edit

”

Prompt:

“

Please say the name of the

entry you would like to edit or say,

“

List names

”

Say:

[Beep]

“

XXXXX... (Ex.

“

Mary's

phone

”

)

”

(Say the voice tag for the

registered name to be edited in the
phonebook.)

Prompt:

“

Home, Work, Mobile, or

Other?

”

Interior Comfort

Bluetooth® Hands-Free

6-89

CX-7_8CG3-EA-11J_Edition1 Page327
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands