Mazda CX-7 Navigation System Owner'S Manual Download Page 438

Page: 438 / 522

Black plate (438,1)

6. Disconnect the bulb from the socket.

7. Install the new bulb in the reverse order

of the removal procedure.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

Fog lights

1. Make sure the ignition is switched off

and the headlight switch is off.

2. Loosen the screws securing the unit.

3. Remove the unit by pulling it outward

using both hands.

4. Disconnect the connector from the unit

by pressing the tab on the connector
with your finger and pulling the
connector downward.

5. Loosen the screws securing the fog

light unit.

6. Press the tab on the bulb socket and

disconnect the connector cord.

8-46

Maintenance and Care

Some models.

Owner Maintenance

CX-7_8CG3-EA-11J_Edition1 Page438
Saturday, September 24 2011 10:34 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands