Mazda CX-7 Navigation System Owner'S Manual Download Page 328

Page: 328 / 522

Black plate (328,1)

Say:

[Beep]

“

Home

”

(Say the

registered location to be edited:

“

Home

”

“

Work

”

“

Mobile

”

, or

“

Other

”

Prompt:

“

XXXXX... (Ex.

“

Mary's

phone

”

) (Registered voice tag) XXXX

(Ex.

“

Home

”

) (Registered location). Is

this correct?

”

10.

Say:

[Beep]

“

Yes

”

11.

Prompt:

“

The current number is

XXXXXXXXXXX (Ex.

“

555-1234

”

)

(Currently registered number). New
number, please.

”

NOTE

If there was no previous phone number
registered to a location (Ex.

“

Work

”

), the

prompt will only read out

“

Number, please

”

12.

Say:

[Beep]

“

XXXXXXXXXXX

(Ex.

“

555-5678

”

)

”

(Say the new

phone number to be registered.)

13.

Prompt:

“

XXXXXXXXXXX (Ex.

“

555-5678

”

) (The new phone number

to be registered). Is this correct?

”

14.

Say:

[Beep]

“

Yes

”

15.

Prompt:

“

Number changed, returning

to main menu.

”

Phonebook data deletion

Erasing individual phonebook data

Individual data registered to the
Bluetooth

Hands-Free phonebook can be

cleared.

NOTE

Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.

1. Press the pick-up button (with/without

7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

Delete

”

Prompt:

“

Please say the name of the

entry you would like to delete or say,

“

List names

”

Say:

[Beep]

“

XXXXX... (Ex.

“

John's

phone

”

)

”

(Say the registered voice tag

to be deleted from the phonebook.)

Prompt:

“

Deleting XXXXX... (Ex.

“

John's phone

”

) (Registered voice tag)

Home (Registered location). Is this
correct?

”

Say:

[Beep]

“

Yes

”

(Without 7-inch navigation system)
Prompt:

“

XXXXX... (Ex.

“

John's

phone

”

) (Registered voice tag) Home

(Registered location) deleted.

”

(With 7-inch navigation system)
Prompt:

“

XXXXX... (Ex.

“

John's

phone

”

) (Registered voice tag) Home

(Registered location) deleted, returning
to main menu.

”

6-90

Interior Comfort

Bluetooth® Hands-Free

CX-7_8CG3-EA-11J_Edition1 Page328
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands