Mazda CX-7 Navigation System Owner'S Manual Download Page 334

Page: 334 / 522

Black plate (334,1)

Prompt:

“

Please say 1 for XXXXX...

(Ex. device A), 2 for XXXXX... (Ex.
device B...)

”

(The device tag of the

registered device is read out by the
HFP.).

Say:

[Beep]

“

”

(Say the number of

the device to be deleted.)

NOTE

Say

“

All

”

to delete all devices (Mobile phone).

Prompt:

“

Deleting XXXXX... (Ex.

device B...) (Registered device tag). Is
this correct?

”

10.

Say:

[Beep]

“

Yes

”

11.

Prompt:

“

Deleted

”

Registered device editing

(Without 7-inch navigation system)

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep]

“

Setup

”

Prompt:

“

Select one of the following:

Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.

”

Say:

[Beep]

“

Pairing options

”

Prompt:

“

Available options are: Pair,

Edit, Delete, List, or Set Pairing Code.

”

Say:

[Beep]

“

Edit

”

Prompt:

“

Please say the name of the

device you would like to edit.
Available devices are XXXXX... (Ex.
device A), XXXXX... (Ex. device B),
XXXXX... (Ex. device C). Which
device please?

”

Say:

[Beep]

“

XXXXX... (Ex. device

”

Prompt:

“

New name please?

”

10.

Say:

[Beep]

“

XXXXX... (Ex. device

”

(Speak a

“

device tag

”

, an

arbitrary name for the device.)

11.

Prompt:

“

XXXXX... (Ex. device C)

(Device tag), is this correct?

”

12.

Say:

[Beep]

“

Yes

”

13.

Prompt:

“

New name saved.

”

(With 7-inch navigation system)

1. Press the pick-up button or talk button

with a long press.

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Setup

”

Prompt:

“

Select one of the following:

Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.

”

Say:

[Beep]

“

Pairing options

”

Prompt:

“

Select one of the following:

Pair, edit, delete, or list.

”

Say:

[Beep]

“

Edit

”

Prompt:

“

Please say 1 for XXXXX...

(Ex. device A), 2 for XXXXX... (Ex.
device B...), which device please?

”

(The device tag of the registered device
is read out by the HFP.)

Say:

[Beep]

“

”

(Say the number of

the device to be edited.)

Prompt:

“

New name please?

”

6-96

Interior Comfort

Bluetooth® Hands-Free

CX-7_8CG3-EA-11J_Edition1 Page334
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands