Mazda CX-7 Navigation System Owner'S Manual Download Page 162

Page: 162 / 522

Black plate (162,1)

Ignition Switch

Auxiliary key (with advanced key)

NOTE

When starting the engine using the advanced
key, refer to Starting the Engine (page 3-10).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-17).

2. Make sure the start knob is in OFF/

LOCK position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

4. Insert the auxiliary key in the ignition

switch.

Ignition Switch Positions

With advanced
key

Without advanced
key

The engraved mark on the actual vehicle
may read OFF or LOCK depending on the
type of ignition system.

OFF/LOCK

The power supply to electrical devices is
turned off. Only in this position can the
key be removed.

5-2

Driving Your Mazda

Starting and Driving

CX-7_8CG3-EA-11J_Edition1 Page162
Saturday, September 24 2011 10:32 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands