Mazda CX-7 Navigation System Owner'S Manual Download Page 322

Page: 322 / 522

Black plate (322,1)

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

New entry

”

Prompt:

“

Name please.

”

Say:

[Beep]

“

XXXXX... (Ex.

“

Mary's

phone

”

)

”

(Say a voice tag for the name

registered.)

Prompt:

“

Adding XXXXX... (Ex.

“

Mary's phone

”

) (Registered voice

tag). Is this correct?

”

Say:

[Beep]

“

Yes

”

Prompt:

“

Home, Work, Mobile, or

Other?

”

10.

Say:

[Beep]

“

Mobile

”

(Say

“

Home

”

“

Work

”

“

Mobile

”

, or

“

Other

”

, for the

desired location to be registered.)

11.

Prompt:

“

Mobile (Location to be

registered). Is this correct?

”

12.

Say:

[Beep]

“

Yes

”

13.

Prompt:

“

Number, please.

”

14.

Say:

[Beep]

“

XXXXXXXXXXX

(Ex.

“

555-1234

”

)

”

(Say the phone

number to be registered.)

15.

Prompt:

“

XXXXXXXXXXX (Ex.

“

555-1234

”

) (Phone number

registration). Is this correct?

”

16.

Say:

[Beep]

“

Yes

”

17.

Prompt:

“

Number saved. Would you

like to add another number for this
entry?

”

18.

Say:

[Beep]

“

Yes

”

“

”

19. If

“

Yes

”

, an additional phone number

registration can be made for the same
entry.
If

“

”

, the procedure proceeds to

Step 20.

20.

Prompt:

“

Returning to main menu.

”

Import contact

Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth

Hands-Free phonebook using

Bluetooth

(Without 7-inch navigation system)

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

Import contact

”

Prompt:

“

The hands free System is

ready to receive a contact from a
phone. Only a home, a work, and a
mobile number can be imported. This
process requires operation of a mobile
phone. Refer to the phone's manual for
more information.

”

6. Device (Mobile phone) operation:

Select one entry from the phonebook
and send it using Bluetooth

Prompt:

“

X (Number of locations

which include data) numbers have been
imported. What name would you like
to use for these numbers?

”

6-84

Interior Comfort

Bluetooth® Hands-Free

CX-7_8CG3-EA-11J_Edition1 Page322
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands