Mazda CX-7 Navigation System Owner'S Manual Download Page 316

Page: 316 / 522

Black plate (316,1)

Say:

[Beep]

“

French

”

(Say the desired

language:

“

English

”

“

French

”

, or

“

Spanish

”

.) (Change the desired

language by saying the language
name.)

NOTE

Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.

Prompt:

“

Would you like to change

the language to French (Desired
language)?

”

Say:

[Beep]

“

Yes

”

(Without 7-inch navigation system)
Prompt:

“

Please wait. Switching to

French phonebook. French selected.

”

(Spoken in the newly selected
language).

(With 7-inch navigation system)
Prompt:

“

Please wait. Switching to

French phonebook. French selected,
returning to main menu

”

(Spoken in

the newly selected language).

Pairing code setting (Without 7-inch
navigation system)

The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand.

NOTE

The initial setting value is

“

0000

”

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep]

“

Setup

”

Prompt:

“

Select one of the following:

Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.

”

Say:

[Beep]

“

Pairing options

”

Prompt:

“

Available options are: Pair,

Edit, Delete, List, or Set Pairing Code.

”

Say:

[Beep]

“

Set pairing code

”

Prompt:

“

Your current pairing code is

XXXX. Do you want to change it to a
different pairing code?

”

Say:

[Beep]

“

Yes

”

Prompt:

“

Please say a 4-digit pairing

code.

”

10.

Say:

[Beep]

“

YYYY

”

11.

Prompt:

“

YYYY is this correct?

”

12.

Say:

[Beep]

“

Yes

”

“

”

13. If

“

Yes

”

, go to Step 14. If

“

”

, the

procedure returns to Step 9.

14.

Prompt:

“

Your new pairing code is

YYYY. Use this pairing code when
pairing devices to the Hands free
system. Do you want to pair a device
now?

”

15.

Say:

[Beep]

“

Yes

”

“

”

16. If

“

Yes

”

, the system switches to the

device registration mode. If

“

”

, the

system returns to standby status.

Device programming (Pairing)

To use Bluetooth

Hands-Free, the device

equipped with Bluetooth

has to be

programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth

audio devices can be programmed to one
vehicle.

6-78

Interior Comfort

Bluetooth® Hands-Free

CX-7_8CG3-EA-11J_Edition1 Page316
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands