Mazda CX-7 Navigation System Owner'S Manual Download Page 329

Page: 329 / 522

Black plate (329,1)

Complete deletion of the phonebook
data

All data registered to the Bluetooth

Hands-Free phonebook can be erased.

NOTE

Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.

1. Press the pick-up button (with/without

7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

Erase all

”

Prompt:

“

Are you sure you want to

erase everything from your Hands Free
system phonebook?

”

Say:

[Beep]

“

Yes

”

Prompt:

“

You are about to delete

everything from your Hands Free
system phonebook. Do you want to
continue?

”

Say:

[Beep]

“

Yes

”

Prompt:

“

Please wait, erasing the

Hands Free system phonebook.

”

10.

(Without 7-inch navigation system)
Prompt:

“

Hands-Free system

phonebook erased.

”

(With 7-inch navigation system)
Prompt:

“

Hands-Free system

phonebook erased, returning to main
menu.

”

Read-out of names registered to the
Bluetooth

Hands-Free phonebook

Bluetooth

Hands-Free can read out the

list of names registered to its phonebook.

1. Press the pick-up button (with/without

7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Phonebook

”

Prompt:

“

Select one of the following:

New entry, edit, list names, delete,
erase all or import contact.

”

Say:

[Beep]

“

List names

”

Prompt:

“

XXXXX..., XXXXX...,

XXXXX... (Ex.

“

John's phone

”

, Mary's

phone, Bill's phone)

”

(Voice guidance

reads out the voice tags registered to
the phonebook.)

Press the talk button with a short press
during the read-out at the desired name,
and then say one of the following voice
commands to execute it.

“

Continue

”

: Continues the list read-

out.

Interior Comfort

Bluetooth® Hands-Free

6-91

CX-7_8CG3-EA-11J_Edition1 Page329
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands