manualshive.com logo in svg

Mazda CX-7 Navigation System, Owner'S Manual

The Mazda CX-7 Navigation System is a cutting-edge feature that enhances your driving experience. With our Quick Start Manual, you can easily navigate through its advanced functionalities. Download the manual for free from manualshive.com to make the most out of your Mazda CX-7's integrated navigation system.

Share
Download
background image

Black plate (23,1)

When using the rear seatback knobs:

CAUTION

When operating the rear seatback
knob, make sure you support the
seatback with your hand. If the
seatback is not supported with your
hand, it will flip forward suddenly
and could cause injury to the finger
that pushes the rear seatback knob
down.

1. Unfasten the lap portion of the center-

rear seat belt (page 2-23).

CAUTION

Always unfasten the lap portion of
the belt before folding the rear-left
seatback. Leaving the lap portion of
the belt fastened could cause
damage to the seat belt, buckle and
seatback.

2. Support the seatback with your hand.

3. Push the rear seatback knob down.

To return the seatbacks to the upright
position

1. Lift the seatbacks upright.

2. Pull on the top of the seatbacks from

inside the vehicle to make sure they are
locked.

3. Fasten the center-rear lap/shoulder belt

and check that all seat belts are routed
properly for passenger use (page 2-23).

WARNING

Always make sure the seat belts are
fully pulled out from under the
seatbacks:

A seat belt caught under a seatback
after the seatback is returned to its
upright position is dangerous. In a
collision or sudden stop, the seat belt
cannot provide adequate protection.

When returning the seatback to the
upright position, make sure there is no
red indication:

A rear seatback not fully returned
and locked in the upright position is
dangerous. Sudden stops or
maneuvering could cause a seatback
to flip forward suddenly resulting in
injury. If the red indicator is visible on
the back of the rear seatback knob,
the seatback is not locked in the
upright position.

Locked position

Unlocked position

Red indicator

Essential Safety Equipment

Seats

2-11

CX-7_8CG3-EA-11J_Edition1 Page23
Saturday, September 24 2011 10:31 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-7 Navigation System

Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
Ford FOCUS RS 2018 Owner'S Manual Supplement preview
FOCUS RS 2018
Brand: Ford Pages: 52
Suzuki Movano Owner'S Manual preview
Movano
Brand: Suzuki Pages: 353
Torklift F2012 Installation Instructions Manual preview
F2012
Brand: Torklift Pages: 16
Ultra-tow XTP Series Owner'S Manual preview
XTP Series
Brand: Ultra-tow Pages: 14
Mercedes-Benz 300D 2.5 1990 Owner'S Manual preview
300D 2.5 1990
Brand: Mercedes-Benz Pages: 121
Menabo BIKE PRO Fitting Instructions Manual preview
BIKE PRO
Brand: Menabo Pages: 8
Camtree G-51 Instruction Manual preview
G-51
Brand: Camtree Pages: 5
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
Vintage Air 561163 Manual preview
561163
Brand: Vintage Air Pages: 28
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Ford 2004 Navigator Owner'S Manual preview
2004 Navigator
Brand: Ford Pages: 368
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4

Brands by name

Popular brands

Load more brands