Mazda CX-7 Navigation System Owner'S Manual Download Page 287

Page: 287 / 522

Black plate (287,1)

2. Press the channel preset button for the

desired tray number while

“

WAIT

”

displayed.

3. When

“

”

is displayed, insert the CD.

NOTE

The CD cannot be inserted to the desired tray
number if the number is already occupied.

Multiple insertion

1. Press and hold the load button (

)

for about 2 seconds until a beep sound
is heard.

2. When

“

”

is displayed, insert the CD.

3. When

“

”

is displayed again, insert

the next CD.

NOTE

The first-inserted CD will be played
automatically when:

No other CD is inserted within 15 seconds
after

“

”

is displayed.

The CD trays are full.

Displaying the CD-inserted tray
number

When you want to know the number for a
CD-inserted tray, press the display button
(

). The tray number will be displayed

for 5 seconds.

Ejecting the CD

Normal ejection

1. Press the CD eject button (

). The

disc number and

“

DISC OUT

”

will be

displayed.

2. Pull out the CD.

NOTE

When the CD is ejected during play, the next
CD will be played automatically.

Ejecting CDs from desired tray number

1. Press and hold the CD eject button (

)

for about 2 seconds until a beep sound
is heard.
The

“

DISC OUT

”

display flashes.

2. Press the channel preset button for the

desired CD number for less than 5
seconds after the beep sound is heard.

3. Pull out the CD.

Multiple ejection

1. Press and hold the CD eject button (

)

for about 2 seconds until a beep sound
is heard.
The

“

DISC OUT

”

display flashes.

2. Press the CD eject button (

) again

for less than 5 seconds after the beep
sound is heard.

NOTE

If the button is not pressed and about 5
seconds have elapsed while

“

DISC OUT

”

flashing, CDs are automatically ejected.

3. Pull out the CD, then the next CD will

be ejected.

NOTE

CDs will be ejected starting with the one
with the lowest number.

All CDs in the tray will be ejected
continuously.

CDs can be ejected when the ignition is
switched off. Press and hold the CD eject
button (

) for about 2 seconds and all

CDs will eject.

Playback

Press the CD play button (

) to start

play when a CD is in the unit.
If a CD is not in the unit when the CD
play button (

) is pressed,

“

NO DISC

”

will flash on and off.

Interior Comfort

Audio System

6-49

CX-7_8CG3-EA-11J_Edition1 Page287
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Summary of Contents for CX-7 Navigation System











































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands

Mazda CX-7 Navigation System, Owner'S Manual

Search results

Summary of Contents for CX-7 Navigation System

Reviews:

Related manuals for CX-7 Navigation System

Brands by name

Popular brands