Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 390

Page: 390 / 410

Black plate (390,1)

Steps for Determining the Correct Load Limit:

Steps for Determining Correct Load Limit:
(1) Locate the statement

“

The combined weight of occupants and cargo should

never exceed XXX kg or XXX lbs

”

on your vehicle's placard.

(2) Determine the combined weight of the driver and passengers that will be

riding in your vehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kg

or XXX lbs.

(4) The resulting figure equals the available amount of cargo and luggage load

capacity. For example, if the

“

XXX

”

amount equals 1400 lbs. and there

will be five 150 lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1400_ 750 (5 × 150) = 650
lbs.)

(5) Determine the combined weight of luggage and cargo being loaded on the

vehicle. That weight may not safely exceed the available cargo and luggage
load capacity calculated in Step 4.

(6) If your vehicle will be towing a trailer, the load from your trailer will be

transferred to your vehicle. Consult this manual to determine how this
reduces the available cargo and luggage load capacity of your vehicle.

9-42

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

CX-7_8X59-EA-07E_Edition3 Page390
Wednesday, July 25 2007 3:20 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands