Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 295

Page: 295 / 410

Black plate (295,1)

Scheduled Maintenance (USA, Canada, and Puerto Rico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are being used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended
intervals.

Maintenance and Care

Scheduled Maintenance

8-3

CX-7_8X59-EA-07E_Edition3 Page295
Wednesday, July 25 2007 3:19 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands