Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 388 | Manualshive

Page: 388 / 410

background image

Black plate (388,1)

GCW

GCW (Gross Combination Weight)

is the weight of the loaded vehicle (GVW) plus the

weight of the fully loaded trailer.

GCWR (Gross Combination Weight Rating)

is the maximum allowable weight of the

vehicle and the loaded trailer - including all cargo and passengers - that the vehicle can
handle without risking damage. (Important: The towing vehicle's braking system is rated
for operation at GVWR, not at GCWR. Separate functional brakes should be used for safe
control of towed vehicles and for trailers weighing more than 1,500 lbs).

The GCW must

never exceed the GCWR.

Maximum Loaded Trailer Weight

is the highest possible weight of a fully loaded trailer

the vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal or
external), a tongue load of 10_15% (conventional trailer) or king pin weight of 15_25%
(fifth-wheel trailer), and driver only (150 lbs).

Consult your dealership (or the RV and

Trailer Towing Guide provided by your dealership) for more detailed information.
Tongue Load or Fifth-Wheel King Pin Weight

refers to the amount of the weight that a

trailer pushes down on a trailer hitch.

Examples:

For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a

proper tongue load range of 500 to 750 lbs. For an 11,500 lb fifth-wheel trailer, multiply by
0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.

9-40

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

CX-7_8X59-EA-07E_Edition3 Page388
Wednesday, July 25 2007 3:20 PM

Form No.8X59-EA-07E

«
...
386
387
388
389
390
...
»

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Zoom-Zoom

Brand: VEAP SHIELD UNITED Pages: 3

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

RadioPRO 5 RP5-GM41

Brand: PAC Pages: 3

Brand: Vauxhall Pages: 2

Brand: Allen Sports Pages: 2

Brand: Trailboss Pages: 8

Brand: Honda Pages: 32

Brand: Mercedes-Benz Pages: 368

Brand: Van Guard Pages: 3

Brand: SCC Pages: 4

Brand: Metra Electronics Pages: 8

Brand: Vauxhall Pages: 131

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Brand: MULTILIFT Pages: 62

Brand: r.LiNK Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands