Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 202 | Manualshive

Page: 202 / 410

background image

Black plate (202,1)

WARNING

Do not drive the vehicle with the KEY
warning light illuminated:

If the KEY warning light remains
illuminated, do not continue to drive
using the advanced key system. Park
the vehicle in a safe place and use
the auxiliary key to continue driving
the vehicle. Have the vehicle
inspected at an Authorized Mazda
Dealer as soon as possible.

When flashing

l

Under the following conditions, the
KEY warning light (red) flashes to
inform the driver that the start knob
will not rotate to the ACC position
even if it is pushed in from the LOCK
position.

l

The advanced key battery is dead.

l

The advanced key is not within
operational range.

l

The advanced key is placed in areas
where it is difficult for the system to
detect the signal (page 3-7).

l

A key from another manufacturer
similar to the advanced key is in the
operational range.

l

Under the following conditions, the
KEY warning light (red) will flash
continuously when the start knob has
not been returned to the LOCK
position to notify the driver that the
advanced key has been removed from
the vehicle. It will stop flashing when
the advanced key is back inside the
vehicle.

l

The start knob has not been returned
to the LOCK position, the driver's
door is open, and the advanced key
is removed from the vehicle.

l

The start knob has not been returned
to the LOCK position and all the
doors are closed after removing the
advanced key from the vehicle.

NOTE

The flashing KEY warning light (red) and the
beep sound operate simultaneously (page
3-19).

KEY Indicator Light (Green)

When illuminated

When the start knob is pushed in from the
LOCK position, the system confirms that
the correct advanced key is inside the
vehicle, the KEY indicator light (green)
illuminates, and the start knob can be
turned to the ACC position (page 3-9).

When flashing

When the advanced key battery power is
low, the KEY indicator light flashes for 30
seconds after the start knob is turned from
the ON position to the ACC or LOCK
position. Replace with a new battery
before the advanced key becomes
unusable (page 3-6).

5-48

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

CX-7_8X59-EA-07E_Edition3 Page202
Wednesday, July 25 2007 3:18 PM

Form No.8X59-EA-07E

«
...
200
201
202
203
204
...
»

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Zoom-Zoom

Brand: LAMBORGHINI Pages: 48

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

Brand: METRON Pages: 4

RGBW Rock Lights

Brand: Lit Lightz Pages: 3

Brand: Buick Pages: 20

FOLDING TOP 1971

Brand: Fisher Body Pages: 37

Brand: Manik Pages: 2

Brand: OHIOSTEEL Pages: 2

Brand: Brodit Pages: 2

Brand: Saturn Pages: 432

Brand: Mitsubishi Pages: 490

Brand: Easee Pages: 21

Brand: APS Pages: 4

Brand: SpeedTech Lights Pages: 2

Brand: Istar Pages: 6

Brand: EZ-ON Pages: 2

Brand: Kuda Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands