Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 283

Page: 283 / 410

Black plate (283,1)

Starting a Flooded Engine

If the engine fails to start, it may be
flooded (excessive fuel in the engine).

Follow this procedure:

1. If the engine does not start within 5

seconds on the first try, turn the key to
the LOCK position, wait 10 seconds
and try again.

2. Depress the accelerator all the way and

hold it there.

3. Turn the ignition switch to the START

position and hold it there

―

for up to 10

seconds. If the engine starts, release the
key and accelerator immediately
because the engine will suddenly rev
up.

4. If the engine fails to start, crank it

without depressing the accelerator

―

for

up to 10 seconds.

If the engine still does not start using the
above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.

In Case of an Emergency

Emergency Starting

7-13

CX-7_8X59-EA-07E_Edition3 Page283
Wednesday, July 25 2007 3:19 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands