Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 336

Page: 336 / 410

Black plate (336,1)

NOTE

LED bulb replacement is not possible. The
rear combination component must be replaced.

License plate lights

1. Wrap a flathead screwdriver with a soft

cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

Replacing Interior Light Bulbs

Overhead light/Map lights (Front)

Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.

Overhead light (Rear), Luggage
compartment light

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order

of removal.

8-44

Maintenance and Care

Owner Maintenance

CX-7_8X59-EA-07E_Edition3 Page336
Wednesday, July 25 2007 3:20 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands