Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 156

Page: 156 / 410

Black plate (156,1)

Ignition Switch

Auxiliary key (with advanced key)

NOTE

When starting the engine using the advanced
key, refer to Starting the Engine (page 3-9).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-15).

2. Make sure the start knob is in LOCK

position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

4. Insert the auxiliary key in the ignition

switch.

Ignition Switch Positions

With advanced
key

Without advanced
key

LOCK

The steering wheel locks to protect
against theft. Only in this position can the
key be removed.

5-2

Driving Your Mazda

Starting and Driving

CX-7_8X59-EA-07E_Edition3 Page156
Wednesday, July 25 2007 3:18 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands